Dinghy Davits for Beneteau Sailboats
Martek davits installed on Beneteau and Oceanis sailboats
From the 311 to the Oceanis 400, Martek davits carry dinghies on Beneteau sailboats of every generation. The photos below show Martek installations on Beneteau 31 to 43-foot sailboats. Our bolt-on davits clamp to your existing stern rail and through-bolt to the deck or transom, so there’s no cutting or welding.
Beneteau Installations
Beneteau Models We’ve Fitted
- Beneteau 311 and 323: Martek dinghy davits
- Beneteau 331: Martek dinghy davits plus an outboard engine hoist
- Beneteau Oceanis 373: MD-600 Dinghy Davits
- Beneteau 385 and Oceanis 390: Martek dinghy davits
- Beneteau Oceanis 400: MD-600 Dinghy Davits
- Beneteau 40, 411, 42 and 432: Martek dinghy davits
Don’t see your model? Our davits fit most Beneteau sailboats with a stern rail. Ask us about yours.
Which Martek Davits Fit Your Beneteau?
Choose your davits by the total weight you’ll carry, not by the length of your Beneteau. Add up the dinghy, outboard motor, fuel tank and any gear you leave in the dinghy.
- Up to 370 lbs: MD-370 Dinghy Davits (185 lbs per arm, 50-inch height, 38-inch reach).
- Up to 600 lbs: MD-600 Dinghy Davits (300 lbs per arm, 47-inch height, 38-inch reach).
- Up to 600 lbs with extra height: MD-600EXT Dinghy Davits (66-inch height) when you need more clearance above the stern rail, swim platform or boarding ladder.
- Solar panels as well: the Solar Arch and Davits carries your panels, dinghy and motor, up to 800 lbs total.
All three davit sets clamp to 1.0, 1.125 or 1.25-inch stern rails, and the universal lower mounts fit flat, vertical or angled surfaces on the deck, transom or swim platform. Before you order, push firmly on your stern rail. If it moves, add Rail Support Arms. A stabilizing strut between the arms stops side-to-side movement. Not sure what you need? Send us photos and measurements of your stern and we’ll recommend the right setup.