Dinghy Davits for Trawlers and Tugs
Martek davits on Mainship, Monk, Albin and other trawlers
Trawlers carry their dinghies in more places than sailboats do: on the upper deck, on the swim platform, or off the transom. Martek makes davits for each spot. The photos below show Martek dinghy davits and pivoting davits on Mainship 35, 350 and 390, Monk 36 and Albin trawlers. Our bolt-on designs attach to your existing rails, deck, transom or swim platform, so there’s no cutting or welding.
Trawler Installations
Trawlers We’ve Fitted
- Mainship 35 and 350: Martek dinghy davits carrying the dinghy and outboard
- Mainship 390: MD-600 Dinghy Davits on the upper deck
- Monk 36: MD-600 Dinghy Davits
- Albin trawler: Martek dinghy davits on the stern
- Swim platform installs: Martek davits mounted on the swim platform, and Pivoting Davits that fold down when not in use
- Raised stern rails: MD-600EXT Dinghy Davits with rail mount extensions to move the arms aft
Don’t see your boat? Send us photos of your stern and we’ll show you the options.
Which Martek Davits Fit Your Trawler?
On a trawler or tug, start with where the dinghy will live.
- On the swim platform, transom or cap rail: Pivoting Davits mount to the swim platform, transom or cap rail, carry up to 800 lbs, and pivot 90 degrees to lift the dinghy out of the water with a winch.
- On an upper-deck or stern rail: the MD-600 Dinghy Davits (600 lbs) or the taller MD-600EXT Dinghy Davits (66-inch height) clamp to 1.0, 1.125 or 1.25-inch rails and bolt to the deck below. rail mount extensions move the arms up to 8 inches aft for clearance.
- Above outboard motors: on outboard-powered boats, the Dinghy Rack stows the dinghy on the swim platform above the motors.
Choose by the total weight of the dinghy, outboard, fuel and gear. Before you order, push firmly on the rail or structure the davits will mount to. If it moves, add Rail Support Arms. Not sure which fits? Send us photos and measurements and we’ll recommend the right setup.